Junos MPLS and VPNs (JMV)

Hersteller: Juniper Networks
Course Outline
This five-day course is designed to provide students with MPLS-based virtual private network (VPN) knowledge and configuration examples. The course includes an overview of MPLS concepts such as control and forwarding plane, RSVP Traffic Engineering, LDP, Layer 3 VPNs, BGP Layer 2 VPNs, LDP Layer 2 Circuits, and virtual private LAN service (VPLS), carrier-of-carrier VPNs. This course also covers Junos operating system-specific implementations of Layer 2 control instances and active interface for VPLS.
Prerequisites & Audience
Students should have intermediate-level networking knowledge and an understanding of the Open Systems Interconnection (OSI) model and the TCP/IP protocol suite. Students should also have familiarity with the Protocol Independent Multicast-Sparse Mode (PIM-SM) protocol. Students should also attend the "Introduction to the Junos Operating System (WGAC-JUN-IJOS)", "Junos Routing Essentials (WGAC-JUN-JRE)", "Junos Service Provider Switching (WGAC-JUN-JSPX)", "Junos Intermediate Routing (WGAC-JUN-JIR)" courses prior to attending this class
Course Objectives
After successfully completing this course, you should be able to:
•Explain common terms relating to MPLS.
•Explain routers and the way they forward MPLS packets.
•Explain packet flow and handling through a label-switched path (LSP).
•Describe the configuration and verification of MPLS forwarding.
•Understand the information in the Label Information Base.
•Explain the two label distribution protocols used by the Junos OS.
•Configure and troubleshoot RSVP-signaled and LDP-signaled LSPs.
•Explain the constraints of both RSVP and LDP.
•Explain the path selection process of RSVP without the use of the Constrained Shortest Path First (CSPF) algorithm.
•Explain the Interior Gateway Protocol (IGP) extensions used to build the Traffic Engineering Database (TED).
•Describe the CSPF algorithm and its path selection process.
•Describe administrative groups and how they can be used to influence path selection.
•Describe the default traffic protection behavior of RSVP-Signaled LSPs.
•Explain the use of primary and secondary LSPs.
•Explain LSP priority and preemption.
•Describe the operation and configuration of fast reroute.
•Describe the operation and configuration of link and node protection.
•Describe the LSP optimization options.
•Describe the behavior of fate sharing.
•Describe how SRLG changes the CSPF algorithm when computing the path of a secondary LSP.
•Explain how extended admin groups can be used to influence path selection.
•Explain the purpose of several miscellaneous MPLS features.
•Explain the definition of the term virtual private network.
•Describe the differences between provider-provisioned and customer-provisioned VPNs.
•Describe the differences between Layer 2 VPNs and Layer 3 VPNs.
•Explain the features of provider-provisioned VPNs supported by the Junos OS.
•Explain the roles of Provider (P) routers, Provider Edge (PE) routers, and Customer Edge (CE) routers.
•Describe the VPN-IPv4 address formats.
•Describe the route distinguisher use and formats.
•Explain the RFC 4364 control flow.
•Create a routing instance, assign interfaces, create routes, and import and export routes within the routing instance using route distinguishers and route targets.
•Explain the purpose of BGP extended communities and how to configure and use these communities.
•Describe the steps necessary for proper operation of a PE to CE dynamic routing protocol.
•Configure a simple Layer 3 VPN using a dynamic CE-PE routing protocol.
•Describe the routing-instance switch.
•Explain the issues with the support of traffic originating on multi-access VPN routing and forwarding table (VRF table) interfaces.
•Use operational commands to view Layer 3 VPN control exchanges.
•Use operational commands to display Layer 3 VPN VRF tables.
•Monitor and troubleshoot PE-CE routing protocols.
•Describe the four ways to improve Layer 3 VPN scaling.
•Describe the three methods for providing Layer 3 VPN customers with Internet access.
•Describe how the auto-export command and routing table groups can be used to support communications between sites attached to a common PE router.
•Describe the flow of control and data traffic in a hub-and-spoke topology.
•Describe the various Layer 3 VPN class-of-service (CoS) mechanisms supported by the Junos OS.
•Explain the Junos OS support for generic routing encapsulation (GRE) and IP Security (IPsec) tunnels in Layer 3 VPNs.
•Describe the purpose and features of a BGP Layer 2 VPN.
•Describe the roles of a CE device, PE router, and P router in a BGP Layer 2 VPN.
•Explain the flow of control traffic and data traffic for a BGP Layer 2 VPN.
•Configure a BGP Layer 2 VPN and describe the benefits and requirements of over-provisioning.
•Monitor and troubleshoot a BGP Layer 2 VPN.
•Explain the BGP Layer 2 VPN scaling mechanisms and route reflection.
•Describe the Junos OS BGP Layer 2 VPN CoS support.
•Describe the flow of control and data traffic for an LDP Layer 2 circuit.
•Configure an LDP Layer 2 circuit.
•Monitor and troubleshoot an LDP Layer 2 circuit.
•Describe and configure circuit cross-connect (CCC) MPLS interface tunneling.
•Describe the difference between Layer 2 MPLS VPNs and VPLS.
•Explain the purpose of the PE device, the CE device, and the P device.
•Explain the provisioning of CE and PE routers.
•Describe the signaling process of VPLS.
•Describe the learning and forwarding process of VPLS.
•Describe the potential loops in a VPLS environment.
•Configure BGP and LDP VPLS.
•Troubleshoot VPLS.
•Describe the Junos OS support for carrier-of-carriers.
•Describe the Junos OS support for interprovider VPNs.
Course Topics
Day 1

Chapter 1: Course Introduction

Chapter 2: MPLS Fundamentals
•MPLS Foundation
•MPLS Configuration
•MPLS Packet Forwarding
•Lab: MPLS Fundamentals

Chapter 3: Label Distribution Protocols
•Label Distribution Protocols
•Lab: Label Distribution Protocols

Chapter 4: Constrained Shortest Path First
•RSVP Behavior Without CSPF
•CSPF Algorithm
•CSPF Tie Breaking
•Administrative Groups
•Interarea Traffic Engineered LSPs
•Lab: CSPF

Day 2

Chapter 5: Traffic Protection and LSP Optimization
•Default Traffic Protection Behavior
•Primary and Secondary LSPs
•Fast Reroute
•Bypass LSPs
•LSP Optimization
•Lab: Traffic Protection

Chapter 6: Fate Sharing
•Junos OS Fate Sharing
•Extended Admin Groups
•Lab: Fate Sharing

Chapter 7: Miscellaneous MPLS Features
•Routing Table Integration
•Forwarding Adjacencies
•Policy Control over LSP Selection
•LSP Metrics
•Automatic Bandwidth
•TTL Handling
•Explicit Null Configuration
•MPLS Pings
•Lab: Miscellaneous MPLS Features

Chapter 8: VPN Review
•Overview of VPNs
•CPE-Based VPNs

Chapter 9: Layer 3 VPNs
•Layer 3 VPN Terminology
•VPN-IPv4 Address Structure
•Operational Characteristics
•Lab: VPN Baseline Configuration

Day 3

Chapter 10: Basic Layer 3 VPN Configuration
•Preliminary Steps
•PE Router Configuration
•Lab: Layer 3 VPN with Static and BGP Routing

Chapter 11: Troubleshooting Layer 3 VPNs
•A Layered Approach
•The Routing-Instance Switch
•PE-Based and CE-Based Traceroutes
•Viewing VRF Tables and PE-PE Signaling Flow
•Monitoring PE-CE Routing Protocols

Chapter 12: Layer 3 VPN Scaling and Internet Access
•Scaling Layer 3 VPNs
•Public Internet Access Options
•Lab: Route Reflection and Internet Access

Chapter 13: Layer 3 VPNs—Advanced Topics
•Exchanging Routes Between VRF Tables
•Hub-and-Spoke Topologies
•Layer 3 VPN CoS Options
•Layer 3 VPN and GRE Tunneling Integration
•Layer 3 VPN and IPsec Integration
•Lab: GRE Tunnel Integration

Day 4

Chapter 14: BGP Layer 2 VPNs
•Overview of Layer 2 Provider-Provisioned VPNs
•BGP Layer 2 VPN Operational Model: Control Plane
•BGP Layer 2 VPN Operational Model: Data Plane
•Preliminary BGP Layer 2 VPN Configuration
•BGP Layer 2 Configuration
•Monitoring and Troubleshooting BGP Layer 2 VPNs
•Lab: BGP Layer 2 VPNs

Chapter 15: Layer 2 VPN Scaling and CoS
•Review of VPN Scaling Mechanisms
•Layer 2 VPNs and CoS

Chapter 16: LDP Layer 2 Circuits
•LDP Layer 2 Circuit Operation
•LDP Layer 2 Circuit Configuration
•LDP Layer 2 Circuit Monitoring and Troubleshooting
•Circuit Cross-Connect
•Lab: Circuit Cross-Connect and LDP Layer 2 Circuits

Chapter 17: Virtual Private LAN Services
•Layer 2 MPLS VPNs Versus VPLS
•BGP VPLS Control Plane
•BGP VPLS Data Plane
•Learning and Forwarding Process

Day 5

Chapter 18: VPLS Configuration
•VPLS Configuration
•VPLS Troubleshooting
•Lab: VPLS

Chapter 19: Interprovider VPNs
•Hierarchical VPN Models
•Junos Support of Carrier-of-Carriers Model
•Junos Support of Carrier-of-Carrier VPN Applications
•Lab: Carrier-of-Carrier VPNs
Related Courses
Advanced Junos Service Provider Routing (WGAC-JUN-AJSPR)
Anfang der Seite

Classroom Dates

Startdatum Enddatum Ort Sprache Status Preis Learning Credits
27 Nov 2017 01 Dec 2017 Asnieres-sur-Seine,
fr Offen €4,000.00
29 Jan 2018 02 Feb 2018 Dakar,
en Offen €2,810.60

Training vor Ort

Gern führen wir nahezu jedes Training auch an Ihrem Wunschtermin und Wunschort für eine geschlossene Gruppe durch: bspw. in Berlin, Frankfurt, Stuttgart, Dresden, München oder Hamburg.

Wie auch immer Sie es nennen wollen: Lehrgang, Schulung, Seminar, Kurs, Training, Coaching, Einzeltraining, Workshop, Inhausseminar oder offenes Seminar; unsere Trainer, Dozenten bzw. Seminarleiter stimmen die Inhalte passgenau auf Ihre individuellen Trainingsbedürfnisse ab. Wir bieten unsere Trainings in verschiedene Sprachen wie z.B. auch Englisch, Spanisch, Niederländisch und Französisch an.

Für ein individuelles Angebot freuen wir uns über Ihre Kontaktaufnahme.

Registrieren oder einloggen um Ihre Anfrage abzuschicken.